To ensure that our 3kw 5kw 6.5kw 8kw 9kw 10kwa Open Type Diesel Generator Set 10 kva Diesel Generators Kena operates correctly, it is important to know how to prime it. Priming the pump is like giving it a nudge so it’ll start functioning smoothly. Without proper priming of the pump, it can lead to troubles in starting the engine and even damage the pump itself“So, in this article, we’ll be discussing the importance of priming the diesel pump and how do you properly do it to get the best performance, the advantages of priming before starting the engine, the problems that may arise if you forget to prime the pump, and what you need to do as a beginner to prime the pump properly”.
When you’re priming the diesel pump, it’s like rousing it from a nap. Just as we stretch and prepare ourselves for a day of physical activity, the diesel pump must warm up and get ready for work. When a diesel pump runs out of fuel, or has been idle for a period of time, the fuel can vaporize and create air pockets. Start the engine without priming the pump and it will struggle to pull up enough fuel, and might not start at all. It could damage the pump and the engine, which are expensive to fix. It is thus very important always to prime the diesel pump before turning over the engine.
There is a primer pump you can use to prime the diesel pump and this can be found on the pump. This is usually a lightweight lever or button that can be pushed or pulled by hand in order to manually pump gas into the system. Before you begin priming, make sure the tank has enough fuel for the pump to pull the fuel up without too much effort. Next, pump the primer pump gradually until you encounter resistance or notice fuel coming out the pump. This indicates that fuel has made it to the pump and should be good to get the engine going. Do refer to your Kena diesel pump manual to apply the specific procedure that gives the best performance.
There are many advantages of priming the diesel pump for your pump, and engine comprehension. It assists in getting the air pockets or bubbles that the engine cause stall and run rough. Priming the pump means making sure the fuel flows evenly and smoothly to the engine, easier to start and more efficient it will turn out. This can also contribute to the longevity of your pump and engine by saving wear on your parts. All in all, priming the diesel pump before starting is a straightforward and necessary step to get the most out of your machine and extend its useful life.
There are a few things that can happen if you fail to prime the diesel pump before you try to start the engine. The chainsaw will be hard to start or won't start at all which is irritating and wastes your time to do your work. Operating the engine without the pump being properly primed may also damage the pump, and cause expensive replacement or repairs. Failing to prime the pump in some instances could result in your engine stalling while running and force you to wait for roadside assistance or local mechanic; not the preferred outcome. VeryuizeJak 15 Noiembrie 2014 21:37 In order to avoid these frequent problems, you should always remember to prime your Kena diesel pump before you even start the engine.
Copyright © Chongqing Kena Electronmechanical Co.,Ltd. All Rights Reserved | Privacy Policy | Blog
